The short answer
You clean it, close the gaps, scrape off everything loose, spot prime the bare spots and then paint. On this Deerfield, IL home, the brick lower level hadn't been painted in a long time, and the old paint was peeling and chipping. We pressure washed all four sides, caulked every gap between the brick and mortar, scraped with a 5-in-1 tool and spot primed with Loxon XP. Then we put on 2 coats of Sherwin-Williams SuperPaint in low luster, color Natural Choice, back brushing every recessed mortar joint.
The problem
These Deerfield homeowners weren't worried about anything in particular. They just really wanted their house painted, and that meant all the brick on the lower level, all four sides.
Up close, the old paint on the brick was peeling and chipping in spots. The cause was plain old age. It hadn't been painted in a long time. The mortar between the bricks also wasn't flush with the brick. It sat back in the joints, which makes it easy to leave bald, unpainted spots.
What we did, step by step
Pressure wash the brick
Before anything else, we pressure washed the brick. Paint and caulk stick much better to a clean surface than to years of dirt.
Caulk the gaps between brick and mortar
We went through and caulked every single gap we could find between the brick and the mortar. That closes up spots where water could get in behind the new paint.
Scrape all the loose paint
We used a 5-in-1 tool, a painter's scraper, to take off the peeling and chipping paint. New paint only holds as well as what's under it.
Spot prime with Loxon XP
Wherever we scraped, we spot primed with Loxon XP masonry paint. That gives the bare spots a solid base before the color goes on.
Put on 2 coats of SuperPaint
Then we put 2 coats of Sherwin-Williams SuperPaint in low luster, color Natural Choice, an off-white, on all the brick. We back brushed between each brick so the paint filled the recessed mortar joints.
How long it took
It came together in 4 days, from pressure washing, caulking and scraping to the second coat of off-white on all four sides.
The tricky part
The mortar between the bricks wasn't flush with the brick. It sat back in the joints, so we had to back brush in between each brick to make sure the mortar was getting filled. That's slow work, but it means there are no bald spots.
The result
The whole brick lower level is now a clean, even off-white on all four sides, with every mortar joint covered. The homeowners are very, very happy, and they were more than happy to give us a Google review.
“We had such a great experience with Pullen Painters! Ben and Patrick did an excellent job painting our home, and we’re really happy with how everything is coming together. Ben was especially attentive to detail and really took the time to make sure even the little things were done right.”
Homeowner, Deerfield, IL (Google review)